Lab 14. Eigrp Pindah Jalur – Bandwidth

Bukan hanya dengan delay, kita juga bisa merubah berdasarkan bandwidth.

*R1

  •  R1(config)#interface gigabitEthernet 1/0
  •  R1(config-if)#no delay 1000000

*R1

  •  R1(config)#interface gigabitEthernet 1/0
  •  R1(config-if)#bandwidth 10

*R1

  •  R1#sh ip eigrp topology 3.3.3.3 255.255.255.255

 IP-EIGRP (AS 10): Topology entry for 3.3.3.3/32

  State is Passive, Query origin flag is 1, 1 Successor(s), FD is 156416

  Routing Descriptor Blocks:

  12.12.12.2 (FastEthernet0/0), from 12.12.12.2, Send flag is 0x0

  Composite metric is (156416/130816), Route is Internal

  Vector metric:

  Minimum bandwidth is 100000 Kbit

  Total delay is 5110 microseconds

  Reliability is 255/255

  Load is 1/255

  Minimum MTU is 1500

  Hop count is 2

 13.13.13.3 (GigabitEthernet1/0), from 13.13.13.3, Send flag is 0x0

Composite metric is (256128256/128256), Route is Internal

Vector metric:

  Minimum bandwidth is 10 Kbit

  Total delay is 5010 microseconds

  Reliability is 255/255

  Load is 1/255

  Minimum MTU is 1500

  Hop count is 1

*R1

  •  R1# sh ip route eigrp

  2.0.0.0/32 is subnetted, 1 subnets

 D 2.2.2.2 [90/156160] via 12.12.12.2, 00:09:17, FastEthernet0/0

  3.0.0.0/32 is subnetted, 1 subnets

 D 3.3.3.3 [90/156416] via 12.12.12.2, 00:09:17, FastEthernet0/0

  23.0.0.0/24 is subnetted, 1 subnets

 D 23.23.23.0 [90/28416] via 12.12.12.2, 00:09:17, FastEthernet0/0

*R1

  •  R1#traceroute 3.3.3.3

 Type escape sequence to abort.

 Tracing the route to 3.3.3.3

 1 12.12.12.2 24 msec 16 msec 24 msec

 2 23.23.23.3 32 msec 36 msec 28 msec

Leave a Reply

*